Anderol® FGCS-2 Plus is a high-performance synthetic food-grade grease formulated with an over-based calcium sulfonate complex thickener and PAO base oil, classified as NLGI Grade 2. This advanced formulation provides exceptional load-carrying capability, outstanding mechanical stability, and superior resistance to water, corrosion, and oxidation.
The calcium sulfonate complex structure offers inherent extreme pressure (EP) and anti-wear properties, making Anderol® FGCS-2 Plus particularly suitable for heavy-duty applications operating under high loads, shock loading, and continuous vibration. Its excellent thermal stability allows reliable long-term lubrication across a wide operating temperature range, while maintaining grease consistency and minimizing oil separation.
Engineered for demanding food processing environments, Anderol® FGCS-2 Plus demonstrates excellent resistance to water washout and spray-off, ensuring continuous lubrication even in applications exposed to frequent washdowns. Compared to conventional mineral oil-based greases, this product typically delivers two to three times longer service life, helping reduce maintenance frequency and overall operating costs.
Anderol® FGCS-2 Plus is registered NSF H1 for incidental food contact and is certified Kosher and Halal, making it fully compliant with stringent hygiene and safety standards in food, beverage, pharmaceutical, and packaging industries. The product is widely approved, recommended, and field-tested by OEMs across multiple industrial sectors.
Features and Benefits
- Superior mechanical stability, even in the presence of heat and water
- Excellent resistance to oil separation under centrifugal forces
- Outstanding load-carrying capacity and wear protection
- Excellent rust and corrosion prevention properties
- High resistance to water washout and spray-off
- Extended service life compared to conventional mineral oil-based greases
- NSF H1 registered for incidental food contact
- Suitable for heavy-duty food-grade applications
Approval
- NSF H1 registered
- Certified Kosher by the Orthodox Union
- Certified Halal by the Islamic Food Council of Europe
- Approved, recommended, and field-tested by numerous OEMs in food processing, bottling, canning, meat processing, and pharmaceutical industries
Handling & Storage
Anderol® lubricants present minimal hazard under normal handling when standard industrial safety practices are followed. In the event of a spill, absorb with inert material and remove promptly, then flush the affected area with water.
Although not highly flammable, Anderol® FGCS-2 Plus can burn and should be kept away from open flames and ignition sources. In case of fire, suitable extinguishing media include water spray, foam, carbon dioxide, or dry chemical.
For optimal product integrity, store Anderol® FGCS-2 Plus in clean, protected locations to prevent contamination. Do not reuse empty containers; flush and send them to an approved re-conditioner.
Technical Data
| Property | Test Method | Anderol® FGCS-2 Plus |
|---|---|---|
| Color | Visual | Tan |
| Thickener | — | Calcium Sulfonate |
| Base Oil Type | — | PAO |
| NLGI Grade | — | 2 |
| Operating Temperature (Long-term) | ASTM D-2265 | -40 to +177 °C |
| Short-Term Peak Temperature | ASTM D-92 | Up to +200 °C |
| Dropping Point | ASTM D-97 | 318 °C |
| Worked Penetration | DIN ISO 2137 | 265 – 295 (0.1 mm) |
| Base Oil Viscosity @ 40 °C | ASTM D-445 | Approx. 50 mm²/s |
| 4-Ball Weld Load | ASTM D-2596 | 4000 N |
| Water Washout @ 80 °C | ASTM D-1264 | 0.5 % |
| Bearing Life @ 160 °C, 1000 rpm | ASTM D-3527 | 280 hours |
| Low Temperature Torque @ -40 °C | ASTM D-4693 | 4.0 Nm |
| DIN Designation | DIN 51.502 | KPHC2R-40 |
Note: Analytical data are typical guide values.
Certifications:
